Set output interval - DMT152

DMT152 User Guide

Document code
M210865EN
Revision
K
Language
English
Product
DMT152
Document type
User guide

Use the INTV command to change the output interval of the automatically repeating measurement messages. The measurement messages are repeated in the RUN mode, or after the R command has been given.

Table 1. INTV command
Syntax Description
INTV [n xxx]<cr>
Set the output interval:
n
time interval = 0 … 255
xxx
time unit = S, MIN, or H

Example:

intv 1 min
Output interval:        1 MIN

The shortest output interval (with n = 0) outputs the measurement messages as quickly as the transmitter’s internal measurement cycle produces them, without additional delay.