Start measurement output - DMT152

DMT152 User Guide
Document code
M210865EN
Revision
K
Language
English
Product
DMT152
Document type
User guide

Use the R command to start the continuous outputting of measurement values as an ASCII text string to the serial line. The format of the measurement message is set with the FORM command.

Table 1. R command
Syntax Description
r<cr> Starts continuous measurement output.

Example:

r
Tdf= -2.5 'C        H2O=  4919 ppm
Tdf= -2.5 'C        H2O=  4918 ppm
Tdf= -2.5 'C        H2O=  4917 ppm
...

Outputting the results continues in intervals issued with the command INTV. You can stop the output by pressing the Esc key, or with the command S. Since the interface is half-duplex, you must enter the commands when the transmitter is not outputting.