Extend analog output range - DMT152

DMT152 User Guide

Document code
M210865EN
Revision
K
Language
English
Product
DMT152
Document type
User guide

Use the AOVER command to allow the analog output channels to exceed their specified range by 10 %. The scaling of the measurement parameter remains as before; the extra range is used for additional measurement range in the wet end.

Table 1. AOVER command
Syntax Description
AOVER [ON/OFF]<cr> [channel] = Analog output channel: 1 or 2

Example:

aover on
: ON

The following example illustrates how the analog output is affected.

Channel 1 outputs Td with voltage output 0 … 5 V (-80 °C  … -30 °C). After giving the AOVER ON command, the range is 0 … 5.5 V (-80 °C … -25 °C).

Note that the -30 °C Td point is still at 5 V.