Cable connections - WAC155

WAC155 User Guide

Document code
M210822EN
Revision
F
Language
English (United States)
Product
WAC155
Document type
User guide

The transmitter connects the wind sensors with the cross arm standard cables through 2 cable glands. Through the cables, the WAC155 transmitter both feeds the sensor power and receives wind data. Plug‑in type screw terminal connectors are provided both for the sensor cables and the output line cable.

The following figure shows the standard cable connections with sensor heating elements connected in series.

Figure 1. Sensor wiring
1
Anemometer cable ZZ45036
2

Spare gland (for chaining the power and signal wires)

3
Gland for power and signal cables
4
Wind vane cable ZZ45037