You can configure the device and view the status information through the service connection. The same interface is used for both the data transmission and the connection. When you open the connection with the OPEN command, the data transmission and query are disabled as long as the service connection remains open.
|
When you change parameter values, you must reset with the RESET command or by powering up to get the new parameters into use. |
| The parameter setting commands are not case-sensitive. The device ID is case-sensitive. |
Enter commands on a single line and terminate with a line feed <lf> or a carriage return <cr> character. Separate parameters and values by a space. You can set only one parameter with a single command.