Configuration commands - WAC155

The following table lists the commands available in the service connection.

Table 1. Configuration commands

Command	Description
OPEN	Opens the service connection.
CLOSE	Closes the service connection.
HELP	Displays the command list.
SETDEV	Sets the ID of the transmitter.
SETMEA	Configures measurement parameters.
SETSPD	Configures wind speed computation.
SETDIR	Configures wind direction computation.
SETMES	Specifies data transmission mode.
SETCOM	Configures communication parameters.
SETALR	Configures sensor alarm limits.
SETHEA	Configures wind sensor heating control.
GETHEA	Displays the current heating status.
SERVICE TIMEOUT	Configures timeout for service connection.
GETSET	Displays the current settings of the device.
ERRS	Displays the current error status.
INIE	Resets the transmitter to factory default settings.
RESET	Resets the transmitter to new settings.

The following table lists the definitions for various command line elements.

Table 2. Definitions for command line elements

Element	Meaning	Text style used
SAMPLE	Specifies the name of the command or utility.	UPPER CASE BOLD
{variable}	Indicates a set of choices from which the user must choose one, several, or all.	lower case enclosed in {braces}
[option]	Indicates optional items.	lower case enclosed in [brackets]
<value>	Specifies the value for the option.	lower case enclosed in <angle brackets>
. , : ;	Punctuation marks are a part of the command and must be included as they are.	lower case
<cr>	Stands for pressing ENTER.	lower case