You can mount WSP150 on a pole mast of the
following diameter.
Disconnect all live voltages.
Attach the unit to the mast close to the protected device with the adjustable mounting
clamp. Set the steel band beneath the latch at the back of the enclosure.
1
Pole mast
2
Fastener
3
Steel band
Fix the steel band around the pole mast. You can shorten the steel band to a suitable
length.
Attach the steel band ends to the fastener and secure the unit to the mast by
tightening the fastener screw.
Open the 4 plastic screws and remove the enclosure cover.