Mounting support arm DKP060SUP1 - DKP202W - DKP203W - DKP204W - DKP204W-CAMPOLE

DKP202, DKP203, DKP204, and DKP204W-CAMPOLE User Guide
Document code
M210373EN
Revision
C
Language
English
Product
DKP202W
DKP203W
DKP204W
DKP204W-CAMPOLE
Document type
User guide
5‑mm Allen key

DKP060SUP1 is used with 60‑mm (2.36‑in) short pole masts (DKP202, DKP203, and DKP204).

Figure 1. DKP060SUP1 installation accessories
1
APPK‑SET mounting kit
2
Mounting plate
3
Support arm (10391)
4
Hex screw M6×16 DIN912 A4 (7 pcs)
5
Spring washer B6 DIN127 A4 (7 pcs)
6
Flat washer A6.4 DIN125 A4 (7 pcs)
  1. Attach the support arm to the mounting plate. Tightening torque 5 Nm.
    1
    Flat washer A6.4 DIN125 A4 (2 pcs)
    2
    Spring washer B6 DIN127 A4 (2 pcs)
    3
    Hex screw M6×16 DIN912 A4 (2 pcs)
  2. Secure the attachment. Tightening torque 5 Nm.
    1
    Flat washer A6.4 DIN125 A4 (1 pc)
    2
    Spring washer B6 DIN127 A4 (1 pc)
    3
    Hex screw M6×16 DIN912 A4 (1 pc)
  3. Attach the mounting plate to the mast using the APPK‑SET mounting kit. Tightening torque 5 Nm.
    1
    Flat washer A6.4 DIN125 A4 (4 pcs)
    2
    Spring washer B6 DIN127 A4 (4 pcs)
    3
    Hex screw M6×16 DIN912 A4 (4 pcs)
  4. Use a spirit level to verify that the support arm is level.
Figure 2. DKP060SUP1 installed