Lowering mast equipped with tilt division flange - DKP204W-CAMPOLE - DKP203W - DKP202W - DKP204W

DKP202, DKP203, DKP204, and DKP204W-CAMPOLE User Guide

Document code
M210373EN
Revision
C
Language
English (United States)
Product
DKP204W-CAMPOLE
DKP203W
DKP202W
DKP204W
Document type
User guide
  • Set of wrenches
Wear protective eyewear, gloves, and a safety helmet.
CAUTION Make sure that there is enough clear area on the tilting side of the mast. The area should be free of obstacles that prevent the mast from being lowered.
You need to lower the mast, for example, when devices installed on the upper assembly need maintenance.
  1. Open the securing nuts and remove them and the washers. Do not open the other nuts.
    CAUTION Do not open the hex bolts in the horizontal hinge axle.
    Figure 1. Mast with tilt division flange
    1
    Base plate of the mast
    2
    Bolts for assembling base plate to the hinge
    3
    Foundation bolt
    4
    Concrete block or leveling/welding plate
    5
    Short pole mast
    6
    Securing nut
    7
    Axle for hinge
    8
    Spring washer
    9
    Adjusting nut
  2. Make sure that you have a good control of the mast, and lower the mast slowly.