The WAC151 cross arm assembly supports the
installation of:
- Vaisala Anemometer WAA151 and Vaisala Wind Vane WAV151
- Vaisala Heated Anemometer WAA252 and Vaisala Heated Wind Vane WAV252
A watertight junction box includes a screw terminal block for power and signal cables. The junction box houses a thermostat switch for controlling WAA151 and WAV151 shaft heating. The thermostat switches on in temperatures below +4 °C (39.2 °F).
WAA252 and WAV252 do not use the cross arm thermostat switch. They have the temperature control integrated in the sensor electronics.
The junction box has 4 cable glands. Typically, 3 cable glands are in use; 2 for sensor cables and 1 for the signal cable. The fourth gland is reserved, for example, for the cable supplying heating power to heated sensors.