Connecting lifting rod to mast - DKP200

DKP206 and DKP210 User Guide

Document code
M210315EN
Revision
E
Language
English (United States)
Product
DKP200
Document type
User guide
Allen key
The delivery may contain a lifting rod that is used with the winch to erect and lower the upper mast assembly. The clamps are preinstalled at the factory to the pedestal tube and to the lowest mast tube. The clamp on the lifting rod has hooks and taps to ease the installation. The stainless-steel bolts are included in the lifting rod assembly set.
  1. Place the lifting rod on the mast assembly.
  2. Make sure that both taps on the clamp go into the railing and the hooks at the end of the clamp go firmly around the opposite clamp.
    1
    Hook
    2
    Tap
    3
    Stainless steel bolt
    4
    Lifting rod assembly set
  3. Install the bolts with the washers and tighten the bolts with an Allen key.
    1
    Lifting rod
    2
    Bolt
    3
    Hook