Installing on Pole - TERMBOX

TERMBOX-9000, 1200, 1212, 1222 User Guide
Document code
M210310EN
Revision
G
Language
English
Product
TERMBOX
Document type
User guide

To connect TERMBOX to the pole with the TERMBOXFIXSET mounting set:

  1. Connect the backplate to TERMBOX using 4 mounting screws. Tighten all 4 screws to ensure the plate is firmly in place.
  2. With Ø 104 mm (4.09 in), Ø 132 mm (5.20 in), and Ø 168 mm (6.61 in) poles, select 2 angle clips from the TERMBOXFIXSET mounting set. Fasten TERMBOX with the angle clips, 4 M8 nuts and washers to the pole.
    1
    Back plate
    2
    TERMBOX
    3
    Angle clips
    4
    Mounting screws (4 pcs)
    5
    M8 nuts and washers (4 pcs)
    6
    Ø 104 mm (4.09 in), Ø 132 mm (5.20 in), and Ø 168 mm (6.61 in) pole (for example, LT31 or wind mast)
  3. With Ø 75 mm (2.95 in) poles, select the 2 angle clips. Fasten TERMBOX with the angle clips and 4 M6 screws, nuts, and washers to the pole.
    1
    Back plate
    2
    TERMBOX
    3
    Mounting screws (4 pcs)
    4
    Angle clips
    5
    Ø 75 mm (2.95 in) pole (for example, FD12(P) or wind mast)
    6
    M6 screws, nuts, and washers (4 pcs)