Mounting wind sensors on cross-arm - WAV151

WAV151 User Guide
Document code
M210294EN
Revision
D
Language
English
Product
WAV151
Document type
User guide
  • 2-mm Allen key
  • Compass
  1. Fit the cable plug through the mounting flange at the end of the cross-arm, and connect the cable to the sensor.
    1
    Plastic washer
    2
    Hex screw
  2. Insert the plastic washers between the flange and the sensor.
  3. Face the sensor product label South, if possible, and mount the sensor to the flange by twisting.
  4. Tighten the screws.
  5. Mount the assembly and tighten the fixing screw.