Connecting the anemometer - WAA151

WAA151 User Guide
Product status
Document code
M210293EN
Revision
D
ft:locale
en-US
Product
WAA151
Document type
User guide
Figure 1. WAA151 connector sensor side
A
F+, power input from 9.5 to 15.5 V DC
B
GND, common ground
C
Fout, signal output
D
HTNG, 20 V DC or V AC
E
HTNG, 20 V DC or V AC
F
Not connected
Vaisala recommends using the SOURIAU UTS6JC10E6P cable connector for the cable side of this sensor.
Figure 2. WAA151 connector cable side
  1. Connect the heating element in the shaft tunnel between pins D and E.
  2. Supply the heating element with 20 V DC or V AC.