Changing the probe - GM70

GM70 User Guide
Document code
M010139EN
Revision
H
Language
English
Product
GM70
Document type
User guide
To change the probe:
  1. Switch off GM70.
  2. Detach the probe as follows:
    • Loosen the plastic probe fastener by unscrewing it about 5 turns.
    • Take a firm hold from the base of the probe and pull strongly until the probe comes loose.
  3. Insert a new probe to the handle as deep as possible. Turn the probe inside the handle until you feel that a step in the probe connector snaps into the groove of the probe handle connector and locks the probe.
  4. Tighten the probe fastener.
  5. Switch on GM70.
    Figure 1. Detaching the probe
    1
    Unscrew the probe fastener (about 5 turns)
    2
    Pull the probe out firmly.