This product has been tested for safety. Note the following precautions:
| WARNING Only licensed
experts may install electrical components. They must adhere to local and state
legislation and regulations. |
| WARNING Only trained service
personnel of Vaisala and its representatives may service the refractometers. Servicing must
be done according to separate instructions defined by Vaisala and must be reported to
Vaisala. |
The process medium may be hot or otherwise hazardous. Use shields and protective clothing
adequate for the process medium. Do not rely on avoidance of contact with the process
medium.
Precautions when removing a refractometer
from the process line:
- Check that the process line is
depressurized and drained.
- Loosen the flow cell screws cautiously.
Be prepared to tighten again.
- Make sure you are clear of any possible
spillage and you have a clear emergency escape path.