Connecting sensor - PR-23 - PR-23-AC - PR-23-AP - PR-23-GC - PR-23-GP - PR-23-M - PR-23-RP - PR-23-SD - PR-23-W

PR-23 Series User Guide
Document code
IM-EN-PR23
Revision
K
Language
English
Product
PR-23
PR-23-AC
PR-23-AP
PR-23-GC
PR-23-GP
PR-23-M
PR-23-RP
PR-23-SD
PR-23-W
Document type
User guide
CAUTION Do not connect or disconnect the sensor connector when the circuits are energized. Switch off the power from indicating transmitter DTR external power switch before disconnecting the sensor cable from the sensor. After connecting the sensor cable back to the sensor, you can switch power back on.
Sensor electrical connections
  1. Remove the 4 screws holding the sensor nameplate. The terminal strip is under the nameplate.
  2. Connect the signal wires to terminal (1) and (2), and the cable shield to terminal (3).
  3. Tighten up the cable gland.
  4. Screw the nameplate back on.