The display units and display decimals are set separately for each sensor, so first go to the Calibration menu of the correct sensor. Then select 2 OUTPUTS in the Calibration menu and in the Outputs menu choose either 1 DISPLAY UNITS or 2 DISPLAY DECIMALS. For the display units, select either 1 CONCENTRATION or 2 TEMPERATURE and then the unit. For display decimals, enter the number of decimals you want to see on display by entering a number in the range of 0 to 5 (0 meaning no decimals are shown).
| Change of concentration unit does not change the numerical value of the concentration. Change of temperature unit recalculates the numerical temperature value according to selected scale (°C or °F). |