Support for CO2 measurement probe GMP251.
Release date: June 2021
New features and improvements
-
CO2 measurements support. The GMP251 can be attached to the RFL100 Data Logger, which joins AP10.
- The operating system was upgraded, and significant architectural refactoring and improvements were made to enhance performance and maintainability.
- Both Web and Touch display user
interfaces were redesigned. Here are the key functional differences from the earlier
release:
- Settings re-organized: VaiNet radio settings and network settings are now both grouped on their own separate pages.
-
In the Maintenance tab of the Web interface, the Partial factory reset feature was replaced with a newly simplified feature called Reset settings. The user can select one or more settings to reset to default values.
- When enabling the touch display password, the settings area gets locked after an idle (user inactive) time of 3 minutes. There is a lock icon overlaid on the settings icon in the home screen when the settings become locked.
- If the display is switched off and the user wakes it up with touch, it will switch off again after 30 seconds of user inactivity.
- When the VaiNet channel is not selected (cleared), the radio is switched off.
- Support for new AP10 hardware revision H. It includes support for a new, more accurate Real Time Clock (RTC).
Fixes
- Fixed all issues related to the partial factory reset feature. See the related enhancement in Known issues.
- Fixed an issue where firmware update would show a failure message even though the update was successful.
Compatibility
-
Tested compatible with RFL100 versions (1.0.0, 1.1.0, 1.2.0, 1.3.0, 1.4.0).
-
Tested compatible with viewLinc Enterprise Server versions 5.0.x and 5.1.x.
Upgradeability
The software was tested compatible with AP10 hardware revision G and H. NOT compatible with AP10 hardware revision F.
Upgrade available from all earlier software releases assuming the hardware is compatible. It requires support from Vaisala Service.