Factory Preventive Maintenance

WindCube v2.1 - 2024/01/24 WindCube - Vertical Profiler Lidar

Document code
B212209EN
Revision
D
Language
English

Preventive maintenance can be planned in advance and purchased at the same moment as the LIDAR System. The Client is responsible and pays for the inbound transport (to Vaisala factory) and Vaisala is responsible and pays for the outbound transport (to the Client) using Incoterm DAP or CIP depending on the country of destination.

A RMA document must be filled by the Client and sent to Vaisala Technical Support before shipping the Lidar to the Service Center. The Preventive Maintenance service cannot be conducted if the document has not been sent beforehand.