Quick Start: Level 1 (L1) Training

WindCube v2.1 - 2024/01/24 WindCube - Vertical Profiler Lidar

Document code
B212209EN
Revision
D
Language
English

The Quick Start service is intended to train the users to the basic use of Lidar, but also to routine maintenance operations, installations and deployments (Level 1 training).

Below a typical training schedule description:

1st day 2st day
Morning Welcome and presentation of the training Welcome

-Inspection of the system

-First installation

-Preliminary performance check

-Night’s data analysis (if possible)

-Data format practical demonstration

-Performances verification (depending on atmospheric conditions)

-Theoretical presentation

-Questions and discussion

-Acceptance and warranty signing

Noon Lunch Lunch – end of the training
Afternoon

- Installation practical demonstration

- Software practical demonstration

- Options practical demonstration (remote control, Geofencing…)

- Switching-Off procedure

- Night operation (if possible)

Evening End of 1st day

The training is provided by WindCube technical expert from Vaisala as well as the installation supervision. At the end of the Trainer Training, a Level 1 certificate is given to each participant. This training grants the right to the trainee to install, operate a WindCube system in the frame of the system warranty.

The certificate is valid for a period of three (3) years after the training. This certificate is renewed with performance of new training or can be extended following completion of the online refresher course (refer to E-Learning (Mooc) - Online refresher section).